HABASIT TT124/AS/PP
Product Name
Product group ︰ TPO conveyor and processing belts
Product subgroups ︰ PP conveyor and processing belts
Major industrial applications ︰ candy / snacks / candy / bar / chewing gum; Tobacco
Belt Application: cooling (line) with; belt high temperature
A special function ︰ wearable; antistatic; easily detached properties; edge wear; hard / adhesion; thermostable
Use / transport mode ︰ level
Product architecture / design
Conveying surface (Material): polypropylene (PP)
Conveying surface (surface): Smooth
Conveying surface (features): do not mount
Conveying surface (color): white
Tensile strength layer (material) ︰ polyester (PET) fabric
Weaving Layers 2
Running surface / drum side (material) ︰ polyester (PET) fabric
Running surface / drum side (surface) ︰ fiber
The running surface / drum side (color) ︰ white
Product Features
Sliding bed ︰
Apply to conveyor rollers:
Suitable for recessed installation ︰ conditionally
Power turns, curved installations ︰ No
Applicable the incision transfer ︰ No
With antistatic characteristics: is
Apply to metal detectors ︰
Flammability: No specific fire-retardant properties
Apply to food, to comply with FDA regulations: Yes - acc to 21CFR parts 170 - 199 Contact your Habasit representative for detailed information.
Applies to food, in line with the USDA: No particular purpose
Apply to food, in line with EU norms: Yes - acc to Regulation (EC) No.. 1935/2004 and Regulation (EU) No 10/2011 as 修订, Contact your Habasit representative for detailed information.
All data are approximate values under standard climatic conditions: 23 ° C/73 ° F, relative humidity of 50% (DIN 50005/ISO 554), and based on the Master Joining Method.
Technical Data
︰ 1.5 mm (0.06 in.) thick
Mass of belt (belt weight) ︰ 1.5 kg / m 2 0.31 lb / sq ft
Knife-edge transmission radius (minimum) ︰ 12.5 mm 0.49 in.
Drum diameter (minimum) ︰ 60 mm 2.4 inches
Drum smallest reverse ︰ 60 mm (2.4 inches) in diameter
Unit width of the load of 1% elongation (k1% static) (Habasit UK standard): a force of 10 N / mm 57 lbs / inch
Unit width at 1% elongation of the tension (k1% ISO 21181/EN 1723) (Habasit the standard SOP3-155): 7 Newton force / mm 40 lbs / inch
Of unit width allowable tension: 20 Newton force / mm 114 pounds / inch
Allowable operating temperature (continuous) ︰ minimum / minimum / at least 0
Up to 120 ° C
° C minimum / minimum / at least 32
A maximum of 248 ° F
° F
The coefficient of friction of the steel drive rollers ︰ 0.15 [-] 0.15 [-]
The friction coefficient of the covering layer of the driving drum with friction ︰ 0.35 [-] 0.35 [-]
The coefficient of friction of the steel slider bed ︰ 0.2 [-] 0.2 [-]
The coefficient of friction of the stainless steel plate slider bed ︰ 0.15 [-] 0.15 [-]
Seamless manufacturing width ︰ 2000 mm (79 in.)
As required to customize other seamless manufacturing width: 1,500 mm 59 inches
All data are approximate values under standard climatic conditions: 23 ° C/73 ° F, relative humidity of 50% (DIN 50005/ISO 554), and based on the Master Joining Method. |
