Habasit MNN-10E
View this Data Sheet as PDF
Product Designation
Product Group: Hamid machine tapes
Product Sub-Group: -
Main Industry Segments: Folding; Paper converting; Paper manufacturing and processing; Paper printing and finishing
Belt Applications: Folder belt; Machine tape; Paper handling belt
Special Features: Abrasion resistant; Adhesive-free joint; Constant and gentle positive grip; Dimensionally stable; Non-marking
Mode of Use/Conveyance: Declined; Horizontal; Inclined; Vertical
Product Design (enlarged)
Product Construction/Design
Conveying Side (Material): Nonwoven (PET/PP)
Conveying Side (Surface): Nonwoven (fleece) structure
Conveying Side (Property): Non-adhesive
Conveying Side (Color): Beige
Traction Layer (Material): Polyester (PET) fabric
Number of Fabrics: 1
Running Side/Pulley Side (Material): Acrylonitrile-Butadiene-Rubber (NBR)
Running Side/Pulley Side (Surface): Rough structure
Running Side/Pulley Side Property: Adhesive
Running Side/Pulley Side (Color): Black
Product Characteristics
Slider bed suitable: No
Carrying rollers suitable: Yes
Troughed installation suitable: No
Antistatically equipped: Yes
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
Thickness: 2.0 mm 0.08 in.
Mass of belt (belt weight): 2.1 kg/m2 0.43 lbs./sq.ft
Pulley diameter (minimum): 20 mm 0.8 in.
Pulley diameter minimum with counter flection: 25 mm 1 in.
Tensile force for 1% elongation (k1% static) per unit of width (Habasit Standard SOP3-155 / EN ISO21181): 8.0 N/mm 46 lbs./in.
Tensile force for 1% elongation after relaxation (k1% relaxed) per unit of width (Habasit Standard SOP3-155 / EN ISO 21181): 5.0 N/mm 29 lbs./in.
Operating temperature admissible (continuous): Min -20
Max 60 °C
°C Min -4
Max 140 °F
°F
Coefficient of friction of driving pulley of steel: 0.7 [-] 0.7 [-]
Seamless manufacturing width: 1200 mm 47 in.
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
Chemical Resistance Class: 6 (for details, see separate overview)
Remark: These indications are not guarantees of properties.
Resistant to: All solids; Dryness; Fats; Gasoline; Humidity; Oils; Rotting; Soiling
Limited resistance to: NA
Not resistant to: Caustic Soda > 10%; Hydrochloric acid > 20%; Sulphuric acid > 20%
Calculations
For most applications calculation is not required. Should you still need a calculation: please ask Habasit.
Installation and Handling Instructions
Do not go below initial elongation (epsilon) ~ 0.3%; Install the slack belt and tension until running perfectly under the full belt load.
Storage
For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original
packaging.
Joining System
Master Joining Method: Flexproof
8 x 30
Remarks: Master joining method for standard applications
Link to Joining Data Sheet
Limitations
Keep belt edges free of any installation/machine contact; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s
analysis in the respective environment.
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
BfR German federal institute for risk assessment (Bundesinstitut fuer Risikobewertung)
EEC European Economic Community
EU European Union (Directive 2002/72/EC)
FDA Food and Drug Administration
NA Not available
NAP Not applicable
USDA United States Department of Agriculture (Food Safety and Inspection Service‚ Washington D.C.)
