|
|
|
Products
Habasit PM-809 |
|
| Product name：Habasit PM-809 |
| Item：哈伯斯特接头机 |
| Details： |
Habasit PM-809
 |
|
| Product Group: |
Hot pressing devices |
| Joining System: |
Flexproof; Step-Flex; Thermofix |
Description
The PM-809/160W is a lightweight hot-pressing device designed for Flexproof and Thermofix joining of Habasit belts up to a width of 800 mm and a thickness of 10 mm. Thanks to a 160 mm wide heat equalization plate, the press can be used also for 10/120 Flexproof geometry.
Technical Data
|
|
|
|
|
| Belt/tape width max. : |
800 |
mm |
31.5 |
in. |
| Belt/Tape thickness max.: |
10 |
mm |
0.4 |
in. |
| Electric power supply: |
1x230, 3x230, 3x400 |
V |
2880 |
W |
| Compressed air supply: |
3 |
bar |
43.5 |
psi |
| Dimensions (LxWxH): |
1120 x 380 x 290 |
mm |
44.1 x 15 x 11.4 |
in. |
| Cooling media: |
Water (ext. supply) |
| Temperature range: |
Min 199
Max |
°C
°C |
Min 390
Max |
°F
°F |
| Weight net: |
|
kg |
|
lbs. |
Operating Instructions
Product Liability, Applications Considerations
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT'S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. |
|
 |
←[Previous：哈伯斯特导轨]
[Next：哈伯斯特分条机]→
|
|
