|
|
|
Products
HABASIT XVT-2205 |
|
| Product name：HABASIT XVT-2205 |
| Item：哈伯斯特糊盒机皮带 |
| Details： |
Habasit Product Data Sheet
XVT-2205
|
|
Product Designation
 |
|
| Product Group: |
Polyamide folder-gluer belts |
| Product Sub-Group: |
Flexfold (CM folder-gluer belts) |
| Main Industry Segments: |
Paper converting; Box making/folder gluer; Paper manufacturing |
| Belt Applications: |
Folder-gluer belt; Live roller drive belt |
| Special Features: |
Adhesive-free joint; Constant coefficient of friction; Dimensionally stable; Longitudinal flexibility |
| Mode of Use/Conveyance: |
Declined; Horizontal; Inclined; Vertical |
Product Construction/Design
|
|
|
| |
Conveying Side (Material): |
Acrylonitrile-Butadiene-Rubber (NBR) |
| |
Conveying Side (Surface): |
Rough structure |
| |
Conveying Side (Property): |
Adhesive |
| |
Conveying Side (Color): |
Light green |
| |
Traction Layer (Material): |
Polyamide (PA) fabric |
|
Number of Fabrics: |
2 |
| |
Running Side/Pulley Side (Material): |
Acrylonitrile-Butadiene-Rubber (NBR) |
| |
Running Side/Pulley Side (Surface): |
Rough structure |
| |
Running Side/Pulley Side Property: |
Adhesive |
| |
Running Side/Pulley Side (Color): |
Yellow |
Product Characteristics
|
|
| Slider bed suitable: |
No |
| Carrying rollers suitable: |
Yes |
| Troughed installation suitable: |
No |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Technical Data
|
|
|
|
|
| Thickness: |
3.0 |
mm |
0.12 |
in. |
| Mass of belt (belt weight): |
3.2 |
kg/m2 |
0.66 |
lbs./sq.ft |
| Pulley diameter minimum with counter flection: |
40 |
mm |
1.6 |
in. |
| Tensile force for 1% elongation (k1% after running in) per unit of width (Habasit standard SOP3-013): |
7 |
N/mm |
40 |
lbs./in. |
| Operating temperature admissible (continuous): |
Min -20
Max 65 |
°C
°C |
Min -4
Max 149 |
°F
°F |
| Seamless manufacturing width: |
1200 |
mm |
47 |
in. |
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
Chemical Resistance
|
|
| Chemical Resistance Class: |
2 |
| Remark: |
These indications are not guarantees of properties. |
| Resistant to: |
All solids; Dirt; Dryness; Fats; Gasoline; Humidity; Mildew; Oils |
| Limited resistance to: |
NA |
| Not resistant to: |
Caustic Soda > 10%; Hydrochloric acid > 20%; Sulphuric acid > 20% |
Calculations
|
| For most applications calculation is not required. Should you still need a calculation: please ask Habasit. |
Installation and Handling Instructions
|
| Do not go below initial elongation (epsilon) ~0.5%.; Install the slack belt and tension until running perfectly under the full belt load. |
Storage
|
| For details consult 'Storage and handling requirements for belts and machine tapes' or contact Habasit.; Protect belts from sunlight/UV-radiation/dust and dirt. Store spare belts in a cool and dry place and if possible in their original packaging. |
Joining System
|
|
| Master Joining Method: |
Flexproof
10 x 80 |
| Remarks: |
Master joining method for standard applications |
| Link to Joining Data Sheet |
|
Limitations
|
| Belt speed must not exceed 300m/min; This product has not been tested according to ATEX standards (atmospheres with explosion risk - ATEX 95 regulation or EU directive 94/9) and therefore is subject to user’s analysis in the respective environment. |
Legend
All data are approximate values under standard climatic conditions: 23°C/73°F, 50% relative humidity (DIN 50005/ISO 554), and are based on the Master Joining Method.
|
|
| * |
No calculation Value |
| 3) |
CLA: Coordination of the centre line-average value Ra (in the US also Arithmetical Average (AA)) to the maximum peak to valley height Rt for surfaces manufactured by chip removal. |
| 8) |
Due to high coefficient of friction of running/pulley side‚ the suitability for use on slider beds is limited |
| EEC |
European Economic Community |
| NA |
Not available |
| NAP |
Not applicable |
Quality System (certified)
|
| Independant certification bodies, worldwide, attest that Habasit AG Switzerland, its affiliated manufacturing companies and the sales organization possess efficient organizational, technical and human resources to maintain, guarantee and provide consistently high quality products and services, to the requirements of the ISO 9001/2000 Quality management systems standard.
Certified Manufacturing Sites:
Habasit AG, Switzerland: Registered by SQS, CH 3052 Zollikofen, Switzerland, since 1987.
Habasit UK: Registered by SGS Yarsley, Camberley, Surrey, UK, since 1992
Habasit Italiana, Vigliano: Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2002.
Plastomeccanica: Registered by Det Norske Veritas, Agrate Brianza, Italy, since 2001.
Habasit America Buffalo, New York: Registered by ISOQAR, United Kingdom, since 2006.
Habasit America Middletown, Connecticut: Registered by ISOQAR, United Kingdom, since 2006. |
Product Liability, Applications Considerations
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT’S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. |
|
 |
←[Previous：哈伯斯特输送带]
[Next：哈伯斯特糊盒机皮带]→
|
|
