|
|
|
Products
Habasit AFZ-1200 |
|
| Product name：Habasit AFZ-1200 |
| Item：哈伯斯特打齿机 |
| Details： |
Picture
Product Designation
 |
|
| Product Group: |
Preparing devices (die cutting tools) |
| Joining System: |
Flexproof; Step-Flex |
Description
The AFZ-1200 is a device for preparing (die-cutting) of Habasit belts and tapes up to a width of 1200 mm and a thickness of 8 mm for the Step-Flex (finger over finger, only two-ply belts) or Flexproof (finger) joints. It is suitable for all standard Habasit finger geometries with a pitch of 10 or 20 mm. Other geometries can be made with special multiple finger punching heads. Die-cutting operation is pneumatic, lateral feed of the punching head is manual by means of an indexed crank drive.
A transportable version of the machine is available. This can be transported without the supporting structure in a station wagon or van and thus be used for preparing of belts on site.
The machine is of "open throat" design, i.e. wider belts than 1200 mm can be punched in several steps.
Technical Data
|
|
|
|
|
| Belt/tape width max. : |
1250 |
mm |
49.2 |
in. |
| Belt/Tape thickness max.: |
8 |
mm |
0.31 |
in. |
| Compressed air supply: |
6 |
bar |
87 |
psi |
| Dimensions (LxWxH): |
1905 x 890 x 1400 |
mm |
75 x 35 x 55.1 |
in. |
| Weight net: |
255 |
kg |
562.2 |
lbs. |
Operating Instructions
Product Liability, Applications Considerations
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT'S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. |
|
 |
←[Previous：哈伯斯特皮带热接机]
[Next：哈伯斯特接头机]→
|
|
