|
|
|
Products
Habasit PQ-18 |
|
| Product name：Habasit PQ-18 |
| Item：哈伯斯特接头机 |
| Details： |
Habasit PQ-18
Product Designation
 |
|
| Product Group: |
Hot pressing devices |
| Joining System: |
Quickmelt |
Description
The PQ-18 is a simple and cost effective tool for welding of Polycord round belts. The joining operation is by blunt welding: Ends of the belt are melted by pressing them against the surface of a precisely regulated hot welding plate. After sufficient heating belt ends are pressed against each other with a defined pressure and left to cool in a defined position. After removing the resulting bead with a knife or by grinding an optimum quality round belt is ready for use.
The PQ-18 is well suitable for on-site installation and small to medium size series fabrication in the workshop.
Technical Data
|
|
|
|
|
| Belt/tape width max. : |
15 |
mm |
0.6 |
in. |
| Belt/Tape thickness max.: |
15 |
mm |
0.6 |
in. |
| Electric power supply: |
120/230 |
V |
max. 200 |
W |
| Dimensions (LxWxH): |
420 x 140 x 120 |
mm |
16.5 x 5.5 x 4.7 |
in. |
| Cooling media: |
Ambient air |
| Working temperature: |
270 |
°C |
520 |
°F |
| Weight net: |
0.68 |
kg |
1.5 |
lbs. |
Operating Instructions
Accessories
Required Accessories
|
|
| S-16 |
The cutting device S-16 is a manual cutting tool to cut Polycord round belts. |
| Order code / number: |
S-16 / 690010 |
| Link to Tool Data Sheet: |
|
Product Liability, Applications Considerations
|
If the proper selection and application of Habasit products are not recommended by an authorized Habasit sales specialist, the selection and application of Habasit products, including the related area of product safety, are the responsibility of the customer.
All indications / information are recommendations and believed to be reliable, but no representations, guarantees, or warranties of any kind are made as to their accuracy or suitability for particular applications. The data provided herein are based on laboratory work with small-scale test equipment, running at standard conditions, and do not necessarily match product performance in industrial use. New knowledge and experiences can lead to modifications and changes within a short time without prior notice.
BECAUSE CONDITIONS OF USE ARE OUTSIDE OF HABASIT'S AND ITS AFFILIATED COMPANIES CONTROL, WE CANNOT ASSUME ANY LIABILITY CONCERNING THE SUITABILITY AND PROCESS ABILITY OF THE PRODUCTS MENTIONED HEREIN. THIS ALSO APPLIES TO PROCESS RESULTS / OUTPUT / MANUFACTURING GOODS AS WELL AS TO POSSIBLE DEFECTS, DAMAGES, CONSEQUENTIAL DAMAGES, AND FURTHER-REACHING CONSEQUENCES. |
|
 |
←[Previous：哈伯斯特打齿机]
[Next：哈伯斯特磨头机]→
|
|
